NO.1 After implementing VTP, the extended VLANs are not being propagated to other VTP switches.
What should be configured for extended VLANs?
A. Enable VTP version 3, which supports extended VLAN propagation.
B. VTP authentication is required when using extended VLANs because of their ability to cause
network instability.
C. Ensure that all switches run the same Cisco IOS version. Extended VLANs will not propagate to
different IOS versions when extended VLANs are in use.
D. VTP does not support extended VLANs and should be manually added to all switches.
Answer: A

300-115 original questions
Explanation:
VTP version 1 and VTP version 2 do not propagate configuration information for extended-range
VLANs (VLAN numbers 1006 to 4094). You must configure extended-range VLANs manually on each
network device.
VTP version 3 supports extended-range VLANs (VLAN numbers 1006 to 4094). If you convert from
VTP version 3 to VTP version 2, the VLANs in the range 1006 to 4094 are removed from VTP control.
Reference:
http://www.cisco.com/en/US/docs/switches/lan/catalyst6500/ios/15.1SY/config_guide/sup2T/vtp.p
d f

NO.2 Which command configures an HSRP group to become a slave of another HSRP group?
A. standby group track
B. standby group backup
C. standby slave
D. standby follow
Answer: D
Explanation:
Perform this task to configure multiple HSRP client groups.
The "standby follow" command configures an HSRP group to become a slave of another HSRP group.
HSRP client groups follow the master HSRP with a slight, random delay so that all client groups do not
change at the same time.
Reference: http://www.cisco.com/en/US/docs/ios-xml/ios/ipapp_fhrp/configuration/15-mt/fhp-
hsrp-mgo.html

(Today, we return to the subject of successful public speaking centering on the physical message of presentation.

Some call this body language. Charles LeBeau is a professor of public speaking and has written several books about how to do it well.

Mr. LeBeau tells VOA that body language includes posture, eye contact and gestures - how you move your hands or arms.)

NO.3 Which SDM template disables routing and supports the maximum number of unicast MAC
addresses?
A. access
B. routing
C. VLAN
D. default
Answer: C

300-115 Study Guide 300-115 exam simulations
Explanation:
To allocate ternary content addressable memory (TCAM) resources for different usages, the switch
SDM templates prioritize system resources to optimize support for certain features. You can select
SDM templates to optimize these features:
Access-The access template maximizes system resources for access control lists (ACLs) to
accommodate a large number of ACLs.
Default-The default template gives balance to all functions.
Routing-The routing template maximizes system resources for Ipv4 unicast routing, typically required
for a router or aggregator in the center of a network.
VLANs-The VLAN template disables routing and supports the maximum number of unicast MAC
addresses. It would typically be selected for a Layer 2 switch.
Reference:
http://www.cisco.com/en/US/docs/switches/lan/catalyst3560/software/release/12.2_55_se/configu
r ation/guide/swsdm.pdf

NO.4 An EtherChannel bundle has been established between a Cisco switch and a corporate web
server. The network administrator noticed that only one of the EtherChannel links is being utilized to
reach the web server. What should be done on the Cisco switch to allow for better EtherChannel
utilization to the corporate web server?
A. Use link-state tracking to allow for improved load balancing of traffic upon link failure to the
server.
B. Enable Cisco Express Forwarding to allow for more effective traffic sharing over the EtherChannel
bundle.
C. Adjust the EtherChannel load-balancing method based on destination IP addresses.
D. Disable spanning tree on all interfaces that are participating in the EtherChannel bundle.
E. Adjust the EtherChannel load-balancing method based on source IP addresses.
Answer: E

("Not only are they nervous because they're doing a presentation, but in addition to that they're really nervous because of their English, and their lack of confidence, lack of experience in their English, they're trying to figure out the grammar, what I want to say, and they're having all kinds of difficulty doing that, and also controlling their body."

We have all seen nervous presenters in classrooms and meetings. One effect of being nervous is moving from side to side. A presenter does not need to stand perfectly still. In fact an audience can lose interest in a speaker who does not move.)

300-115 Test Answers 300-115 Actual Test
Explanation:
EtherChannel load balancing can use MAC addresses, IP addresses, or Layer 4 port numbers, and
either source mode, destination mode, or both. The mode you select applies to all EtherChannels
that you configure on the switch. Use the option that provides the greatest variety in your
configuration. For example, if the traffic on a channel only goes to a single MAC address (which is the
case in this example, since all traffic is going to the same web server), use of the destination MAC
address results in the choice of the same link in the channel each time. Use of source addresses or IP
addresses can result in a better load balance.
Reference: http://www.cisco.com/c/en/us/support/docs/lan-switching/etherchannel/12023-4.html

NO.5 Refer to the exhibit.
Which option shows the expected result if a show vlan command is issued? A)
B)
C)
D)
A. Exhibit C
B. Exhibit B
C. Exhibit D
D. Exhibit A
Answer: D

300-115 Study Materials 300-115 Practice Questions
Explanation:
In this case, the port has been configured both as a trunk and as a switchport in data vlan 10.
Obviously, a port can not be both, so even though Cisco IOS will accept both, the port will actually be
used as a trunk, ignoring the switchport access VLAN 10 command.

NO.6 An access switch has been configured with an EtherChannel port. After configuring SPAN to
monitor this port, the network administrator notices that not all traffic is being replicated to the
management server. What is a cause for this issue?
A. VLAN filters are required to ensure traffic mirrors effectively.
B. The port channel can be used as a SPAN source, but not a destination.
C. SPAN encapsulation replication must be enabled to capture EtherChannel destination traffic.
D. RSPAN must be used to capture EtherChannel bidirectional traffic.
Answer: B

300-115 Real Dumps
Explanation:
A source port or EtherChannel is a port or EtherChannel monitored for traffic analysis. You can
configure both Layer 2 and Layer 3 ports and EtherChannels as SPAN sources. SPAN can monitor one
or more source ports or EtherChannels in a single SPAN session. You can configure ports or
EtherChannels in any VLAN as SPAN sources. Trunk ports or EtherChannels can be configured as
sources and mixed with nontrunk sources. A port-channel interface (an EtherChannel) can be a SPAN
source, but not a destination.
Reference:
http://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst6500/ios/122SX/configuration/guide/b
ook/span.html#wp1040905

NO.7 Enablement of which feature puts the port into err-disabled state when the port has PortFast
enabled and it receives BPDUs?
A. EtherChannel
B. BPDU guard
C. BackboneFast
D. BPDU filtering
Answer: B

300-115 pdf

NO.8 Ferris Plastics, Inc. is a medium sized company, with an enterprise network (access, distribution
and core switches) that provides LAN connectivity from user PCs to corporate servers. The
distribution switches are configured to use HSRP to provide a high availability solution.
DSW1 -primary device for VLAN 101 VLAN 102 and VLAN 105
DSW2 - primary device for VLAN 103 and VLAN 104
A failure of GigabitEthemet1/0/1 on primary device should cause the primary device to release its
status as the primary device, unless GigabitEthernet1/0/1 on backup device has also failed.
Troubleshooting has identified several issues. Currently all interfaces are up. Using the running
configurations and show commands, you have been asked to investigate and respond to the
following question.
What is the priority value of the VLAN 105 HSRP group on DSW2?
A. 100
B. 50
C. 150
D. 200
Answer: A

(How a speaker moves is important. Whole-body movement should be slow and planned to command attention. Such movement helps to communicate confidence.

New public speakers know that they should look at the audience while they speak. But they look at their notes on a paper or at the screen if they have an electronic presentation.)

300-115 Exam Tests
Explanation:
Use "show standby brief" command on console2. Very easy to se" priority of Vlan1"5 is 100.

Only to find a way to success, not to make excuses for failure. DumpKiller's 300-115 test questions materials include 300-115 test questions and answers. The data is worked out by our experienced team of IT professionals with their own exploration and continuous practice. DumpKiller's 300-115 test questions materials have high accuracy and wide coverage. It will be a grand helper that will accompany you to prepare for 300-115 test questions.

Would you like to improve your IT skills through learning the Cisco 300-209 exam dumps related knowledge to won other people's approval? Cisco certification exam can help you perfect yourself. If you successfully get Cisco 300-209 exam dumps certificate, you can finish your work better. Although the test is so difficult, with the help of DumpKiller exam dumps you don't need so hard to prepare for the exam. After you use DumpKiller Cisco 300-209 exam dumps, you not only can pass the exam at the first attempt, also can master the skills the exam demands.

Exam Code: 300-115
Exam Name: Implementing Cisco IP Switched Networks (SWITCH v2.0)
One year free update, No help, Full refund!
300-115 Test Questions Total Q&A: 191 Questions and Answers
Last Update: 03-06,2016

300-115 Exam Cram Detail: 300-115 Test Questions

Exam Code: 300-209
Exam Name: Implementing Cisco Secure Mobility Solutions
One year free update, No help, Full refund!
300-209 Exam Dumps Total Q&A: 174 Questions and Answers
Last Update: 03-06,2016

300-209 Training online Detail: 300-209 Exam Dumps

DumpKiller will be with you, and make sure you can be successful. No matter how big your IT dream it is, our DumpKiller will help you to make it come true step by step. Because DumpKiller's 300-209 exam dumps material is worked out by senior IT specialist team through their own exploration and continuous practice. If you still have some hesitation, you can download 300-209 exam dumps and answers on probation on DumpKiller websites. I believe that it won't let you down.

300-115 Free Demo Download: http://www.dumpkiller.com/300-115_braindumps.html

("Same thing with eye contact – they find it really, really difficult - some of them find it really difficult - making eye contact with the audience, because they'll be looking at their notes, they'll be looking at their computer, they'll be looking at the screen, they will be looking at the floor. The problem of having notes, and trying to talk from notes , often is a big problem. So they have trouble with eye contact."

Charles LeBeau says the best way to avoid this problem is to use images and few words for notes instead of sentences. The image should help communicate the point you want to make. Writing a few words with the image on your slide helps you remember that point. Then you can look at the audience while speaking.)